iPhone 5C

  • iPhone 5C Accesories
  • iPhone 5C spare parts

    iPhone 5C

    There are 67 products.

    iPhone 5C Technical Specifications

    The iPhone 5C is a smartphone that was designed and developed by Apple Inc. It is the seventh generation of iPhone mobile phones.

    Basic Features

    • Operating System: iOS 7, upgradable to iOS 10.3.3
    • Processor: Dual-core 1.3 GHz Swift (ARM v7-based)
    • Memory: 1 GB DDR3 RAM
    • Storage: 8GB, 16GB, 32GB and no Card slot
    • D...

    iPhone 5C Technical Specifications

    The iPhone 5C is a smartphone that was designed and developed by Apple Inc. It is the seventh generation of iPhone mobile phones.

    Basic Features

    • Operating System: iOS 7, upgradable to iOS 10.3.3
    • Processor: Dual-core 1.3 GHz Swift (ARM v7-based)
    • Memory: 1 GB DDR3 RAM
    • Storage: 8GB, 16GB, 32GB and no Card slot
    • Display: 4.0 inches, 640 x 1136 pixels, 16:9 ratio
    • Camera: 8 Megapixel rear, 1.2 Megapixel front
    • Battery: Non-removable Li-Po 1510 mAh battery (5.73 Wh)

    Replacement Instructions for iPhone 5C

    Before getting started on replacing your iPhone 5C, make sure that the replacement parts you have gotten are correct and functioning accordingly.

    Step 1: Removing the Screen

    • First off, turn off the phone.
    • Remove the two Pentalobe screws at the bottom next to the Lightning connector using a 5-point Pentalobe screwdriver.
    • Attach a suction cup to the front panel as close as possible to the home button.
    • Lift the panel up carefully while releasing the clips located at the top of the phone. Do not fully remove the panel.

    Step 2: Battery Removal

    • After properly detaching the panel, remove the battery connector screw and bracket.
    • Disconnect the battery connector by lifting it from the socket on the logic board.
    • Remove the battery using a plastic opening tool. Be sure to avoid puncturing or bending the battery.

    Step 3: Installing New Parts

    Follow the removal steps in reverse to install the new parts. Make sure all screws are accounted for and not mixed.

    Also remember to connect the battery last, after making sure the connector is aligned correctly.

    Step 4: Completing The Process

    After finishing the installation, turn on the iPhone to test if everything is working correctly.

    If any complications occur, repeat these steps or seek help from a professional technician.

    Less
    More
    Showing 31 - 60 of 67 items