iPhone 5s SE spare parts

Technical Characteristics of Repuestos iPhone 5s SE

The Repuestos iPhone 5s SE is an array of replacement parts compatible with the iPhone 5s SE.

• Screen: 4-inch display with a resolution of 1136 x 640 pixels explains the crystal clear display quality.
• Battery: The capacity of 1624mAh offers long-term power support.
• Camera: The 12-megapixel primary camera allows for high-quality photos and videos.
• Processor: Equipped with an A9 chip for smooth, efficient performance.
• Memory: 2GB RAM with internal storage options of either 16GB, 32GB or 64GB.

Instructions for Replacing Repuestos iPhone 5s SE

Tools Needed

Before we start, make sure you have the following tools:

• iPhone 5-point Pentalobe screwdriver
• Standard #000 Phillips screwdriver
• A Plastic opening tool
• A suction cup for screen removal

Procedure

Follow the steps below to replace Repuestos iPhone 5s SE:

• First, power off your iPhone 5s SE.
• Remove the two Pentalobe screws next to the charging port using the Pentalobe screwdriver.
• Attach the suction cup to the screen, and gently pull to create a small gap between the screen assembly and the rear case.
• Use the plastic opening tool to pry the screen open. Be careful not to damage any internal components.
• Once the screen is open, locate the metal cover over the screen connectors and remove the screws holding it in place with the Phillips screwdriver.
• Disconnect the screen connectors. Now, you can remove the screen assembly.
• To replace any internal parts, locate the appropriate screws or brackets holding the part in place, remove them, and replace the part.
• Once finished replacing parts, reassemble the phone by following the disassembly instructions in reverse order. Ensure all screws are tightened, and the screen is securely closed.
• Turn on your phone to ensure everything is working correctly.