iPhone 6 plus

Technical Characteristics of iPhone 6 Plus

The iPhone 6 Plus is an iconic smartphone model from Apple that boasts a larger 5.5-inch display and a superior battery life compared to its predecessors. Here are the technical specifications:

• Operating System: iOS 8, upgradable to iOS 12.4.6
• Display: 5.5 inches LED-backlit IPS LCD
• Resolution: 1080 x 1920 pixels
• Processor: Apple A8
• Memory: 1 GB RAM
• Storage: options of 16GB, 64GB or 128GB
• Primary Camera: 8 MP
• Secondary Camera: 1.2 MP
• Battery: 2915 mAh
• Colors: Space Gray, Silver, Gold

Instructions to Replace iPhone 6 Plus

Replacing an iPhone 6 Plus involves multiple steps but with the right tools and patience, it is achievable. Follow these instructions for a successful replacement:

Tools Required

• Pentalobe Screwdriver
• Spudger
• Phillips Screwdriver
• iSclack or suction cup

Procedure

Make sure to power off your iPhone before beginning any disassembly process.

• Remove the two Pentalobe screws at the bottom of the iPhone.
• Use the iSclack or suction cup to carefully separate the front panel assembly from the rear case.
• Remove the five screws securing the front panel assembly cable bracket, and then remove the bracket.
• Disconnect the front-facing camera and sensor cable connector, the display data cable connector and the digitizer cable connector using the spudger.
• Remove the front panel assembly from the rear case.
• Replace the damaged part with the new part and reassemble carefully.

Remember, dealing with electronics can be risky and it's important to handle all parts with care. If difficulty persists, reach out to a professional for guidance.