iPhone 6 accesories
There are 8 products.Technical Characteristics of Accesorios iPhone 6
The iPhone 6 Accesorios include a range of essential components that contribute to the functionality and performance of the device.
- Screen: The iPhone 6 features a 4.7-inch Retina HD display with 1334 x 750 resolution.
- Battery: It possesses a non-removable Li-Po 1810 mAh battery (6.9 Wh...
Technical Characteristics of Accesorios iPhone 6
The iPhone 6 Accesorios include a range of essential components that contribute to the functionality and performance of the device.
- Screen: The iPhone 6 features a 4.7-inch Retina HD display with 1334 x 750 resolution.
- Battery: It possesses a non-removable Li-Po 1810 mAh battery (6.9 Wh).
- Camera: The rear (iSight) camera is 8 megapixels while the front (FaceTime) camera is 1.2 megapixels.
- Speaker: One bottom-mounted speaker is available for audio output.
- Home Button: It serves as the main navigation button and houses the device's Touch ID fingerprint sensor.
Replacing Accesorios iPhone 6
For the purpose of this guide, we will specifically focus on the battery replacement. Remember, you should only perform repairs if you are comfortable with the process and take full responsibility for any potential damage. Always be sure to power off your iPhone 6 before starting the replacement process.
Tools Needed:
- Pentalobe Screwdriver
- Philips #00 Screwdriver
- Plastic Opening Tools
- Spudger
- Tweezers
- New iPhone 6 Battery
Battery Replacement Instructions:
Step 1:
- Remove the two Pentalobe screws next to the Lightning connector at the bottom of the iPhone.
Step 2:
- Use a plastic opening tool to gently separate the display from the case. Start from the bottom and work your way around the edges.
Step 3:
- Once the screen is slightly separated, use the spudger to disconnect the three flex cable connectors that attach the display to the motherboard.
Step 4:
- Remove the two screws securing the battery connector to the logic board, detach the connector, and lift the battery out of the case.
Step 5:
- Insert the new battery and reconnect its connector to the logic board, then replace the screws.
Step 6:
- Reconnect the three flex cable connectors, align the display with the top of the case, press it back into place, and replace the Pentalobe screws.
Remember to be patient and careful during the replacement process to avoid any potential damage to your device.
Less More
Disponible
Disponible
Out of stock
Out of stock
Disponible
Disponible
Disponible
Disponible