iPhone 6S

Technical Characteristics of iPhone 6S

The Apple iPhone 6S is a major upgrade over its predecessor, the iPhone 6, featuring improved hardware specifications and major software upgrades. Below are some of the technical characteristics of the iPhone 6S.

• Processor: Apple A9
• Memory: 2 GB LPDDR4 RAM
• Storage: 16, 64 or 128 GB
• Display: 4.7 inches, 1334 x 750 pixels at 326 ppi
• Camera: 12 Megapixels
• Operating System: iOS 9, upgradable to iOS 14.6

Instructions to Replace iPhone 6S

The following are the detailed instructions on how to replace an iPhone 6S. Please note that a specialized toolkit is required for the process, and utmost care is necessary throughout to avoid accidental damage.

Step 1: Power off your iPhone 6S

Before breaking apart your device, always ensure that it is turned off to avoid any electrical damage.

Step 2: Remove the screws

Remove the two pentalobe screws located at the bottom of the iPhone, next to the charging port.

Step 3: Applying the Suction Cup and Lifting the display

Apply a suction cup to the bottom left corner of the device and carefully pry the screen open up to about a 45-degree angle.

Step 4: Disconnecting the battery

Use a specialized screwdriver to unscrew the cover that protects the battery connector. Carefully disconnect the battery.

Step 5: Disconnecting the screen

Remove the cover from the top right corner that protects the screen connectors. Then, carefully disconnect these connectors.

Step 6: Installing the new screen

Connect the new screen's connectors to the phone, and screw back the cover. After that, reattach the battery connector and its cover.

Step 7: Closing up the phone

Close the phone by applying pressure around its contour. Insert the pentalobe screws back in.

Step 8: Power on your iPhone 6S

Turn the phone back on to check functionality. If everything is in order, the repair has been successful.