Spare part iPhone 6S

Technical Specifications of Repuestos iPhone 6S

The Repuestos iPhone 6S features the following components:

• 4.7 inch (diagonal) LED-backlit widescreen
• 1334-by-750-pixel resolution at 326 ppi
• A9 chip with 64-bit architecture
• 12-megapixel iSight camera
• 5-megapixel FaceTime HD camera
• Fingerprint sensor built into the Home button

Instructions on How to Replace Repuestos iPhone 6S

Before starting, ensure you have the necessary tools, including a pentalobe screwdriver, a set of compact screwdrivers, a suction cup, and a spudger.

Step 1: Remove the screws

Unscrew the two pentalobe screws at the bottom of the iPhone next to the charging port

Step 2: Open the Device

Attach a small suction cup to the screen, just above the home button. Pull gently upwards to create a small gap between the screen and the rear casing

Step 3: Unplug the Battery

Once you have the screen lifted, locate and remove the battery connector inside the phone.

Step 4: Remove the Display Assembly

You will need to remove several screws to free the display assembly. Be careful and keep track of these screws; they are of different sizes and should be placed back in their original locations.

Step 5: Replace Parts

Replace the damaged components with Repuestos iPhone 6S parts. Make sure they are properly aligned and install all screws correctly.

Step 6: Reassembly

Follow the steps in reverse to reassemble your iPhone 6S. Make sure that all screws are properly set and all cables are connected.

Please note: This is a general guide. Exact methods may vary depending on the specific parts to be replaced and your experience with smartphone repair.