iPhone 7 plus

Technical Characteristics of iPhone 7 Plus

The iPhone 7 Plus is a smartphone designed and marketed by Apple Inc. Here are some of its technical features:

• Operating System: iOS 10, upgradable to iOS 14.4
• Processor: Apple A10 Fusion
• Display: 5.5 inches, 1080 x 1920 pixels, IPS LCD
• Memory: RAM: 3 GB, ROM: 32/128/256 GB, no card slot
• Camera: Dual 12 MP, f/1.8 & f/2.8, OIS, 2x optical zoom
• Battery: Li-Ion 2900 mAh, non-removal

Instructions to Replace the iPhone 7 Plus Screen

Below are the step-by-step instructions to replace the iPhone 7 Plus screen:

What You Need:

• Pentalobe screwdriver
• Tri-point Y000 screwdriver
• Suction handle
• Plastic opening tool
• Spudger
• New iPhone 7 Plus screen

Step-by-Step Instructions:

• First, switch off the iPhone before starting the repair.
• Remove the two 3.4 mm Pentalobe screws at the bottom of the device.
• Attach a suction cup to the screen and pull up the screen about 1cm from the frame.
• Use a plastic spudger to disconnect the home button cable connector.
• Remove the three Y000 screws securing the battery connector bracket and remove the bracket.
• Disconnect the battery connector by prying it up from the logic board.
• Disconnect the five front panel sensors by using the pointed end of the spudger.
• Unscrew the four Y000 screws securing the display cable bracket and remove the bracket.
• Disconnect the three display cable connectors by prying them up from the logic board.
• Now, the screen should be free, gently remove it.
• Transfer the speaker, front camera, and the home button to the new display.
• Now repeat the operations in reverse order to reassemble your iPhone with the new screen.