iPhone 7

Technical Specifications of iPhone 7

The iPhone 7, designed and marketed by Apple Inc., is an intuitive, innovative, and sleek smartphone.

Key Features

• Operating System: iOS 10, upgradable to iOS 14.4
• Processor: Quad-core 2.34 GHz (2x Hurricane + 2x Zephyr)
• Display: 4.7 inches, LED-backlit IPS LCD, capacitive touchscreen, 16M colors
• Resolution: 750 x 1334 pixels
• Memory: 2GB RAM with 32/128/256 GB storage
• Camera: 12 MP Rear Camera, 7 MP Front Camera
• Battery: Non-removable Li-Ion 1960 mAh battery

Guide to replace iPhone 7

Below is a detailed step-by-step instruction on how to replace your iPhone 7:

Tools Needed

• P2 Pentalobe Screwdriver
• Tri-point Y000 Screwdriver Bit
• Spudger
• Suction Handle
• New iPhone 7

Steps:

1. Before starting, power off your iPhone.

2. Remove the two 3.4 mm P2 Pentalobe screws at the bottom of the phone.

3. Attach a suction cup to the lower front panel and pull on the handle to create a gap.

4. Use a spudger to disconnect the home button connector and the battery connector from their respective sockets.

5. Then use a Y000 screwdriver to remove the two 1.9 mm screws securing the bracket over the front panel.

6. Gently, lift the front panel assembly from the rear case.

7. Now install your new iPhone 7 by reversing these steps.

8. Turn on your new iPhone 7 to ensure the replacement was successful.