iPod Nano 3

iPod Nano 3 Technical Specifications

The iPod Nano 3, also known as iPod Nano 3rd generation, is a portable media player designed by Apple Inc. It is characterized by its compact size and rectangular design with round edges. Below are its main technical characteristics:

• Screen size: 2.0 inches (diagonal)
• Resolution: 320 x 240 pixels
• Storage capacity: 4GB or 8GB
• Battery life: Up to 24 hours of music playback
• Weight: 1.74 ounces (49.2 grams)
• Size: 2.75 x 2.06 x 0.26 inches

Instructions on How to Replace iPod Nano 3

Note: Please ensure you have all the necessary tools before you begin the replacement process. Proceed at your own risk.

Step 1: Open the Device

Using a thin plastic opening tool, gently pry open the case. Start from the bottom, carefully unlatching each clip.

Step 2: Remove the Battery

Disconnect the battery connector from the logic board. Lift the battery out without straining the wires.

Step 3: Remove the Logic Board

Remove the screws securing the logic board. Carefully lift it out, ensuring you do not damage any attached cables.

Step 4: Install the New Battery

Place the new battery into the device. Connect it to the logic board properly.

Step 5: Reassemble the Device

Replace the logic board and fasten it. Align the battery and fix it. Place the back cover in its original position and apply gentle pressure until it clicks back into place.

After carrying out these steps, your iPod Nano 3 should now be functioning with a new battery.