iPod Nano 3 repair parts

Repuestos iPod Nano 3 Technical Specifications

The Repuestos iPod Nano 3 is an essential piece for the functioning of your device. Here are the technical characteristics:

• Model: iPod Nano 3rd Generation
• Dimensions: 69.8 mm x 52.3 mm x 6.5 mm
• Weight: 49.2 g
• Display: 2.0 inches (diagonal) color LCD
• Resolution: 320 x 240 pixels
• Capacity: 4 GB, 8 GB

Instructions for Replacing Repuestos iPod Nano 3

Follow the instructions carefully to replace your Repuestos iPod Nano 3.

• Switch off your iPod Nano by holding the play/pause button for a few seconds until the screen goes blank.
• Remove the two screws at the bottom of the iPod with a small Philips screwdriver.
• Very gently pry open the case, starting from the bottom, using a thin tool.
• Once open, carefully disconnect the battery's connector from the logic board. Set the battery aside.
• Remove screws from the logic board and gently lift it up to reveal LCD connector. Disconnect this connector.
• Now you can remove the old LCD screen. Place your new Repuestos iPod Nano 3 screen onto the board.
• Reverse these steps to reassemble your iPod Nano.

Remember, always handle with care to avoid damaging the interior and the screen of your iPod Nano.