iPod Touch 4 spare parts

Technical Characteristics of Repuestos iPod Touch 4

The Repuestos iPod Touch 4 is a reliable device that has some notable technical characteristics. Be sure to consider these specifications before proceeding with any repair or replacement.

• Display: 3.5-inch (diagonal) widescreen Multi-Touch display
• Resolution: 960 by 640 pixels
• Camera: 0.7-megapixel iSight camera
• Processor: A4 chip
• Battery: Built-in rechargeable lithium-ion battery
• Storage: Comes in 8GB, 32GB, and 64GB

Instructions for Replacing Repuestos iPod Touch 4

Follow the steps below to replace the Repuestos iPod Touch 4 effectively:

Step 1: Tools Preparation

Provide the needed tools which are: a 0 Phillips screwdriver, plastic opening tools, and a small suction cup.

Step 2: Remove the Screen

• Detach the two 3.4 mm screws next to the dock connector.
• Place the suction cup on the screen, and while lifting it up, use the plastic opening tool to pry the screen off.

Step 3: Unplug the Ribbon Cables

Unplug three ribbon cables numbered as 1, 2, and 3 connecting the screen to the motherboard.

Step 4: Remove Speaker Assembly

• Remove the two Phillips screws securing the speaker assembly, and remove it gently.

Step 5: Install the Replacement Parts

Install the new screen and speaker assembly. Make sure to fasten screws properly. Plug in all cables as before.

Step 6: Reassemble the Device

Carefully reassemble the iPod Touch, ensuring everything fits as before.

Note

Make sure to carry out the process carefully to prevent any hardware damage. If you are not confident in conducting the replacement procedure, it is recommended to seek professional help.