iPod touch Accesories 4
There are 2 products.Technical Characteristics of Accesorios iPod Touch 4
The Accesorios iPod Touch 4 presents various desirable features which significantly enhance user experience.
- Screen: The iPod Touch comes with a 3.5-inch touch screen that has a resolution of 960 x 640 pixels.
- Processor: It utilizes a 1 GHz Apple A4 processor which ensures smooth oper...
Technical Characteristics of Accesorios iPod Touch 4
The Accesorios iPod Touch 4 presents various desirable features which significantly enhance user experience.
- Screen: The iPod Touch comes with a 3.5-inch touch screen that has a resolution of 960 x 640 pixels.
- Processor: It utilizes a 1 GHz Apple A4 processor which ensures smooth operations.
- Memory: This device is equipped with 256 MB of RAM and it comes with different storage options: 8, 32 and 64 GB.
- Operating System: The iPod Touch 4 operates on iOS 4 upgradable to iOS 6.1.6.
- Battery: It is powered by a Non-removable Li-Po battery that can last up to 40 hours when fully charged.
Instructions on How to Replace Accesorios iPod Touch 4
Replacing the Accesorios iPod Touch 4 is not a difficult task if you follow the steps outlined below carefully:
Tools Required
- Screwdriver
- Spudger
- Hot Air Gun or Hairdryer
- Suction cup
- New Accesorios iPod Touch 4
Step-by-step Procedure
Before embarking on the replacement process, ensure you have powered off the device to avoid any mishaps.
- Starting on the bottom edge of the device, use the screwdriver to remove the two Phillips #00 screws that go next to the dock connector.
- Use a hairdryer or hot air gun to slightly warm up the screen to soften the adhesive. Be careful to not overheat the device as this can cause damage.
- Press the suction cup onto the screen, ensuring it's above the home button. Lift up to create a small gap between the screen and the rear case.
- Insert the spudger into this gap and gently move it around the side edges to further separate the screen assembly from the device.
- Lift the screen but don't completely detach it from the rest of the device. There are ribbon cables still connected on the top edge.
- Carefully detach these ribbon cables using a spudger. Be sure to lift and not pull to prevent any damage.
- Once all the cables are disconnected, you can now remove the screen assembly from the device.
- Attach the new screen following the reverse order of the procedure.
Remember: It's always better to get the device serviced from a professional if you're not confident doing it yourself.
Less More
Out of stock
Out of stock