iPod Touch 5 spare parts

Technical Characteristics of Repuestos iPod Touch 5

The Repuestos iPod Touch 5 components have the following technical specifications:

• 4-inch (diagonal) widescreen display with Multi-Touch IPS technology
• 1136 x 640 pixel resolution at 326 ppi
• A5 chip processor
• Rear 5-megapixel iSight camera with 1080p recording capabilities
• Front 1.2-megapixel FaceTime HD camera with 720p recording capabilities
• 16 GB, 32 GB, or 64 GB storage options

Instructions to Replace Repuestos iPod Touch 5

Before starting, make sure you have the necessary tools including a Pentalobe Screwdriver, Phillips #00 Screwdriver, Plastic Opening Tools, Small Suction Cup, and a Spudger.

Step 1: Removing the Screws

Firstly, remove the two screws on the bottom side of the iPod.

Step 2: Applying the Suction Cup

Next, apply a suction cup on the screen and carefully pull up to remove the screen. You may have to use a little extra force as the adhesive around the edges is quite strong.

Step 3: Disconnecting the Battery

With a plastic tool, disconnect the battery from the device. This is crucial to ensure power isn't flowing through the device while you work.

Step 4: Removing the Logic Board

Remove the screws holding the logic board in place. Once done, you can carefully lift the main logic board away from its housing.

Step 5: Installing the New Components

After the logic board is out of the way, you will have direct access to the iPod touch's battery and screen. Replace the faulty component with the new one, using the reverse steps of what you took to remove them.

Step 6: Assembling the iPod

Once the necessary replacements have been made, simply follow the disassembly steps in reverse to reassemble the device, ending with replacing the two screws on the bottom side of the iPod.

Please remember to handle the device and its components carefully during the entire process, as they are fragile and could be damaged under too much pressure.