Jiayu G2 repuestos

Jiayu G2 Repuestos Technical Characteristics

The Jiayu G2 repuestos come with different notable features that enhance the performance of your device. Below are some key features:

• Processor: MediaTek MTK6577 dual-core 1.0 GHz Cortex-A9
• Display: 4.0 inches, with a 480 x 800 pixels resolution
• Storage: NAND Flash 4GB
• Camera: 8 MP rear camera with 2 MP front
• Operating System: Android 4.0

Instructions on Replacing Jiayu G2 Repuestos

Before you start the process, ensure your device is no longer connected to any power source. You'll need a small Phillips head screwdriver and a plastic opening tool for this process.

Step 1: Removing the Battery

• Start by turning off the smartphone.
• Remove the back cover by sliding your thumbnail along the seam.
• Lift the battery at the notch and carefully remove it from the phone.

Step 2: Removing the Screws

• Locate the screws holding the device together and carefully remove them with a Phillips head screwdriver.

Step 3: Separating the Smartphone Pieces

• Use the plastic opening tool to carefully lift the inner layers of the phone.
• Work slowly and start from the edges to prevent any damage.

Step 4: Replace the Repuestos

• Locate the repuestos that need replacing.
• Gently remove the defective repuestos and replace them with the new ones. Be careful not to damage any of the phone’s hardware.

Step 5: Reassemble the phone

• Once the new repuestos are in place, reassemble the phone. Place back the internal layers of the phone, then the screws, and then the battery.
• First, place the back cover at the bottom edge of the phone, then apply slight pressure around the edges to lock it into place.

Ensure you test the new repuestos for functionality before returning the device to regular use.