Leagoo Kiicaa Mix spare parts

    There are 3 products.

    Technical Characteristics of Leagoo Kiicaa Mix Repuestos

    The Leagoo Kiicaa Mix phone parts, commonly termed as 'Repuestos' in Spanish, are specific components that are designed for the Leagoo Kiicaa Mix smartphone model. These pieces can be used to replace damaged or malfunctioning parts of the Leagoo Kiicaa Mix, allowing the phone to function p...

    Technical Characteristics of Leagoo Kiicaa Mix Repuestos

    The Leagoo Kiicaa Mix phone parts, commonly termed as 'Repuestos' in Spanish, are specific components that are designed for the Leagoo Kiicaa Mix smartphone model. These pieces can be used to replace damaged or malfunctioning parts of the Leagoo Kiicaa Mix, allowing the phone to function properly. Below are some of the main technical details that you should know.

    • Screen: 5.5-inch IPS LCD with a resolution of 1080 x 1920 pixels.
    • Processor: MediaTek MT6750T Octa-core processor (4x Cortex-A53 1.5 GHz & 4x Cortex-A53 1.0 GHz).
    • Memory: 3GB of RAM and 32GB of internal storage.
    • Battery: 3,000 mAh capacity.
    • Camera Modules: Rear - 13MP + 2MP, Front - 13MP.

    Instructions for Replacing Leagoo Kiicaa Mix Repuestos

    1. Gather the Necessary Tools

    Before replacing any parts on your Leagoo Kiicaa Mix, it's important to have the right tools on hand. This typically includes a set of precision screwdrivers and a phone opening tool.

    2. Turn off the Phone

    Always make sure to turn off your Leagoo Kiicaa Mix and remove the SIM card before starting any repair process. This step is critical for safety of the device.

    3. Open the Back Cover

    Insert your phone opening tool between the back cover and the frame of the phone. Gently pry off the back cover, starting from the bottom.

    4. Unscrew and Remove Old Parts

    Remove the screws that are holding the part in place. Depending on the part you're replacing, there may be several screws to remove. After unscrewing the part, gently lift it out from the phone.

    5. Install the New Part

    Place the new part in the same location where you removed the old part from. Make sure it aligns correctly with the screw holes, and then re-insert the screws and tighten them.

    6. Close the Phone

    Finally, snap the back cover back onto the phone and press it firmly all around to secure it in place. Turn on the phone, and check to see if the replaced part is functioning properly.

    Remember, handling sensitive electronics may void your warranty and can risk damaging the device. It's always best to consult an expert if unsure.

    Less
    More
    Showing 1 - 3 of 3 items