Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) To be determined
Tax: €0.00
Total (tax incl.)
Continue shopping Proceed to checkout

    Leagoo Lead 1 repuestos

    There are 2 products.

    Technical Characteristics - Leagoo Lead 1 Repuestos

    Leagoo Lead 1 Repuestos are the spare parts specific to the Leagoo Lead 1 smartphone. These spare parts may include components such as the screen, the battery, the SIM card slot, the charging port, or even the motherboard itself. What follows is a brief outline of the key technical specificati...

    Technical Characteristics - Leagoo Lead 1 Repuestos

    Leagoo Lead 1 Repuestos are the spare parts specific to the Leagoo Lead 1 smartphone. These spare parts may include components such as the screen, the battery, the SIM card slot, the charging port, or even the motherboard itself. What follows is a brief outline of the key technical specifications of the Leagoo Lead 1.

    Main features

    • Screen: 5.5-inch display with a resolution of 1280 x 720p
    • Processor: Quad-core 1.3GHz
    • Memory: 1GB RAM and 8GB built-in storage (expandable up to 32GB via micro SD)
    • Battery: 2200mAh battery
    • Camera: 13MP Rear Camera, 5MP Front Camera

    Instructions on how to replace Leagoo Lead 1 Repuestos

    Please follow these steps closely, ensuring that you are careful to not damage any internal components as you work.

    Step 1: Power off the device

    Before you begin, ensure that your device is turned off. This will prevent any unexpected short circuits that might occur during the repair process.

    Step 2: Remove the back cover

    Start by removing the back cover of your device. This can be done by applying a slight amount of pressure to the seam between the cover and the body of the phone.

    Step 3: Remove battery

    Once the back cover is off, carefully lift out the battery from the battery holder and set it aside.

    Step 4: Unscrew chassis

    You'll typically see a number of small screws around the edge of the phone interior. Use a compatible screwdriver to remove them.

    Step 5: Replace required part

    Depending on the repuesto part you're replacing, the process may differ slightly. Regardless, always be sure to handle components with care to avoid causing any additional damage.

    Step 6: Replace and tighten screws

    Once the new part is secure, re-attach the back chassis using the screws you previously removed. Make sure each screw is tightened correctly; over-tightening can cause damage.

    Step 7: Replace battery and cover

    Put the battery back in its appropriate slot, and then carefully click the back cover into place. Ensure it's securely fitted before powering your device back on.

    Note:

    Always consider professional assistance if you're unsure about any step. The steps provided should be used with caution and at your own risk.

    Less
    More
    Showing 1 - 2 of 2 items

    This store asks you to accept cookies for performance, social media and advertising purposes. Social media and advertising cookies of third parties are used to offer you social media functionalities and personalized ads. Do you accept these cookies and the processing of personal data involved?