Leagoo S8 Pro spare parts

Technical Characteristics of Leagoo S8 Pro Repuestos

The Leagoo S8 Pro boasts impressive hardware and is fitted with the following key repuestos:

• Display: A stunning 5.99-inch LTPS IPS LCD display with a resolution of 2160 x 1080 pixels.
• Processor: Powered by MediaTek Helio P25(MT6757CD) and coupled with a Mali T880 MP2 graphics card.
• Memory: Comes with 6GB of RAM for performance and a 64GB storage capacity which can be expanded up to 256GB through a microSD Card.
• Camera: The rear camera is 13+5MP with autofocus while the front camera is an 8MP sensor, perfect for capturing high-quality photos and videos.
• Battery: A non-removable Li-Po 3050mAh battery which supports quick charging technology.

Instructions for Replacing Leagoo S8 Pro Repuestos

Tools Needed

• Plastic Opening Tools
• Small Philips Screwdriver
• Spudger

Procedure

Step 1: Power off your Leagoo S8 Pro
Before starting the repair process, make sure your phone is completely powered off to avoid damage.

Step 2: Remove the Back Cover
Use the plastic tool to gently pry off the back cover starting from the bottom edge. Be careful not to damage the interior parts.

Step 3: Remove the Battery
Unscrew the screws securing the battery using your Philips screwdriver. You can then lift up the battery by using a plastic spudger.

Step 4: Replace the Required Part
Now that the battery and back cover have been removed, you can access the rest of the components. Depending on what you're replacing, the process will vary. Always make sure the parts are compatible with your Leagoo S8 Pro.

Step 5: Reassemble the Phone
Once the broken repuesto is replaced, put back the battery, screw in the screws then click the back cover into place. Make sure all screws are tightened and the cover fits correctly to avoid damage.

Note

Take note that opening your device can void your warranty. If you are not comfortable with following these steps, it is recommended to contact a professional technician.