Leeco Cool 1 spare parts

Technical Characteristics of Leeco Cool 1 Repuestos

The Leeco Cool 1 Repuestos offers a range of components that can be replaced, including the screen, battery, mainboard, among others. Below are the main components and their characteristics:

• Screen: The display is an in-cell IPS LCD capacitive touchscreen with 16M colors. It measures 5.5 inches with a resolution of 1080 x 1920 pixels.
• Battery: The device has a Non-removable Li-Po 4060 mAh battery.
• Mainboard: It supports a Qualcomm MSM8976 Snapdragon 652 (28 nm).
• Front Camera: The front camera is an 8 MP, f/2.2, 80 degree wide-angle lens.
• Rear Camera: The dual rear cameras are 13 MP, f/2.0, and PDAF respectively.
• Micro USB port: It supports USB Type-C 1.0 reversible connector.

Instructions for Replacing Leeco Cool 1 Repuestos

Preparation

Before you start, make sure you have the necessary tools: a small Phillips screwdriver, a prying tool, and replacement parts. Also, make sure your workspace is clean and well-lit.

Replacing the Screen

1. Turn off the phone. Use the prying tool to gently remove the back cover.
2. Unscrew the visible screws to loosen the frame.
3. Remove the battery carefully to avoid damaging the connections.
4. Unscrew and remove the old screen display.
5. Attach the replacement screen and lightly screw it in place.
6. Replace the battery and make sure connections are secure.
7. Screw the frame back in place and replace the back cover.

Replacing the Battery

1. Turn off the phone and remove the back cover with the prying tool.
2. Unscrew the frame and carefully lift off.
3. Disconnect the battery connector.
4. Replace with the new battery and reconnect it.
5. Screw the frame back on and replace the back cover.

Please, for all the replacements, be careful and patient to prevent damaging your phone. If unsure, seek professional help.