Lenovo A806 repuestos

Technical Characteristics of Lenovo A806 Repuestos

Screen

Type: IPS LCD capacitive touchscreen

Size: 5.0 inches, 68.9 cm²

Resolution: 720 x 1280 pixels, 16:9 ratio (~294 ppi density)

Processor

Type: Octa-core 1.7 GHz Cortex-A7

Memory

RAM: 2 GB

Internal Storage: 16 GB

Card Slot: microSD, up to 32 GB (dedicated slot)

Battery

Capacity: 2500 mAh, Li-Ion, non-removable

Camera

Primary: 13 MP, autofocus, LED flash

Secondary: 5 MP

Operating System

Out of the Box: Android 4.4.2 (KitKat)

Instructions to Replace Lenovo A806 Repuestos

Tools Needed

• Small Phillips-head screwdriver
• Plastic opening tool
• Suction cup tool
• Spudger tool
• Replacement parts

Steps

1. Power Off the Device

Ensure your Lenovo A806 is completely powered off to prevent any accidental short circuits or damage to internal components.

2. Remove the Back Cover

Use a plastic opening tool to gently pry off the back cover. Start from one corner and work your way around the edges to release the clips holding the cover in place.

3. Detach the Battery

The battery in Lenovo A806 is non-removable; however, if you need to access internal components, carefully disconnect the battery connector using a spudger to avoid any damage. Do not force it, and take your time.

4. Remove the Screws

Using a small Phillips-head screwdriver, remove all visible screws securing the midframe. Keep track of the screws as they might be of different sizes.

5. Separate the Midframe

Use a spudger tool to carefully separate the midframe from the front assembly. Carefully release any clips around the edges to avoid breaking the midframe.

6. Disconnect Internal Components

Disconnect all ribbon cables and connectors attached to the motherboard. Use the plastic tools to gently lift the connectors from their sockets without applying excessive force.

7. Remove and Replace Defective Parts

Identify and remove the defective parts you need to replace (e.g., screen, camera module). Carefully install the new parts, ensuring all connectors align correctly and are securely attached.

8. Reassemble the Device

Reconnect all ribbon cables and connectors to the motherboard. Ensure everything is securely attached. Place the midframe back and press it gently until all clips are securely fastened. Reinsert all the screws you removed earlier.

9. Reattach the Back Cover

Snap the back cover into place, ensuring all edges are aligned and the cover is securely attached without any gaps.

10. Power On the Device

Press the power button to turn on your Lenovo A806 and verify that the replacement parts are functioning correctly.

By following these steps, you can replace the necessary parts (repuestos) of your Lenovo A806 effectively and safely.