Lenovo K10 Note spare parts

Technical Characteristics of Lenovo K10 Note Repuestos

The Lenovo K10 Note is a mid-range smartphone that offers a variety of replacement parts, also known as repuestos. These parts ensure the functionality and longevity of the device. Below are the technical characteristics of common Lenovo K10 Note repuestos:

Display

Size: 6.3 inches
Resolution: 1080 x 2340 pixels
Type: IPS LCD

Battery

Capacity: 4050 mAh
Type: Li-Po non-removable

Camera

Rear Camera: Triple 16 MP + 8 MP + 5 MP
Front Camera: 16 MP

Motherboard

Supported Processor: Qualcomm Snapdragon 710
RAM: 4GB or 6GB options

Other

Charging Port: USB Type-C
Audio Jack: 3.5mm

Instructions for Replacing Lenovo K10 Note Repuestos

Replacing the repuestos for a Lenovo K10 Note requires a careful approach to ensure that the device remains in good working condition. Follow these detailed instructions to replace common parts:

1. Replacing the Display

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a plastic pry tool to carefully lift the back cover.
• Step 3: Unscrew the screws holding the mid-frame in place and remove the mid-frame.
• Step 4: Disconnect the battery connector to avoid any electrical damage.
• Step 5: Disconnect the display connectors from the motherboard.
• Step 6: Use a heat gun to soften the adhesive holding the display in place.
• Step 7: Gently lift the old display and replace it with the new one.
• Step 8: Reconnect the display connectors, battery, and reassemble the device.
• Step 9: Power on the device to test the new display.

2. Replacing the Battery

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a plastic pry tool to lift the back cover.
• Step 3: Unscrew the screws holding the mid-frame in place and remove the mid-frame.
• Step 4: Disconnect the battery connector from the motherboard.
• Step 5: Use a plastic card to carefully pry out the old battery.
• Step 6: Place the new battery and connect the battery connector to the motherboard.
• Step 7: Reassemble the device by replacing the mid-frame and back cover.
• Step 8: Power on the device to ensure the new battery is working correctly.

3. Replacing the Rear Camera

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a plastic pry tool to remove the back cover.
• Step 3: Unscrew the screws holding the mid-frame and remove the mid-frame.
• Step 4: Disconnect the rear camera connector from the motherboard.
• Step 5: Carefully remove the old rear camera module.
• Step 6: Place the new rear camera module in the correct position and connect it.
• Step 7: Reassemble the device by replacing the mid-frame and back cover.
• Step 8: Power on the device and test the new camera.

4. Replacing the Charging Port

• Step 1: Power off the device and remove the SIM card tray.
• Step 2: Use a plastic pry tool to lift the back cover.
• Step 3: Unscrew the screws holding the mid-frame in place and remove the mid-frame.
• Step 4: Disconnect the battery and the charging port flex cable from the motherboard.
• Step 5: Unscrew and remove the charging port module.
• Step 6: Place the new charging port module and secure it with screws.
• Step 7: Reconnect the battery and charging port flex cable to the motherboard.
• Step 8: Reassemble the device by replacing the mid-frame and back cover.
• Step 9: Power on the device to test the new charging port.