Lenovo K5 Pro spare parts

Lenovo K5 Pro Technical Characteristics

The Lenovo K5 Pro is a noteworthy smartphone with considerable features. Here are some of its key technical specifications:

• Diaplay: It touts a 5.99-inch display offering a resolution of 1080 x 2160 pixels.
• Processor: The phone runs on a Qualcomm SDM636 Snapdragon 636 processor.
• Memory: Comes with variants of 4GB/6GB RAM and 64GB/128GB of internal storage.
• Battery: It is backed by a 4050mAh non-removable battery.
• Camera: It features a dual rear camera setup, 16MP + 5MP, and a 16MP + 5MP dual front camera setup for selfies.

Instructions for Replacing Lenovo K5 Pro Repuestos (Parts)

Follow these detailed steps to safely replace parts of the Lenovo K5 Pro:

Tools Required

• Small Phillips Screwdriver
• Plastic Opening Tools
• Tweezers
• Heat Gun

Step-by-step Replacement Procedure:

Note: Ensure the device is powered off and unplugged before starting any repair process.

1. Step 1: Begin by removing the SIM card tray of the Lenovo K5 Pro.
2. Step 2: Heat the edges of the back cover using a heat gun on a low setting to help loosen the adhesive.
3. Step 3: Use a plastic opening tool to gently pry the back cover off. Be careful not to crack the glass.
4. Step 4: Remove all visible screws from the plate shielding the motherboard using the small Phillips screwdriver.
5. Step 5: Carefully lift the shield plate to reveal the motherboard and device interior.
6. Step 6: Disconnect the battery connector and other visible connectors with your plastic opening tool or tweezers.
7. Step 7: From here, each part can be replaced according to the specific requirements. Be mindful of any ribbon cables or small parts that may be attached.
8. Step 8: Once the faulty parts are replaced, repeat the steps in reverse order to reassemble the device.

Caution: Always take care while handling electronic parts and use appropriate safety measures. If you are unsure about any step, it is recommended to seek professional help.