Lenovo K6 Note spare parts

Technical Characteristics of Lenovo K6 Note Repuestos

The Lenovo K6 Note repuestos are specialized parts designed to improve the functionality of the Lenovo K6 Note smartphone. These parts include:

• 5.5" Full HD IPS display screen
• Qualcomm Snapdragon 430 processor
• Micro USB port
• 16MP rear camera with dual-tone LED flash
• 8MP front camera
• 3GB/4GB RAM
• 32GB internal memory expandable with microSD
• 4000mAh battery

Instructions for Replacing Lenovo K6 Note Repuestos

Note: The replacement of Lenovo K6 Note repuestos involves the disassembly and reassembly of the device. Therefore, it is advisable that this task is only completed by appropriately trained specialists or under the supervision of one.

Tools needed:

• Phillips-head screwdriver
• Spudger
• Tweezers
• Plastic opening tools

Procedure:

Step 1: Switch Off Your Device

Firstly, ensure to completely power down your Lenovo K6 Note before you start the replacement to avoid any electrical damage.

Step 2: Remove the Back Cover

Remove the SIM card tray and the SD card tray if they're inserted. Then, using the plastic opening tool, gently pull the back cover starting from the top edge.

Step 3: Uncovering the Internal Components

With the help of the screwdriver, take out all screws securing the mid frame. Carefully lift the mid frame to reveal the internal components of the device.

Step 4: Disconnecting Connections

Identify the damaged repuesto that needs replacing. Use the spudger to disconnect it from the motherboard. If the damaged part is the battery, first remove all connections that block access to it.

Step 5: Replacing the Damaged Repuesto

Carefully replace the damaged part with the new repuesto and reconnect it to the motherboard. Make sure all connections are secure.

Step 6: Reassembling the Device

Once the damaged part has been replaced, reposition the mid frame and secure it with the screws. Finally, attach the back cover, making sure all edges snap securely into place.

Remember, all smartphone repairs should be done with preciseness and patience to ensure specification adherence and device functionality.