Lenovo Legion Pro 5G spare parts

Lenovo Legion Pro 5G Replacement Parts

The Lenovo Legion Pro 5G is a high-performance smartphone designed for gamers. Below are the key technical characteristics of its replacement parts:

Technical Characteristics

• Display: 6.65 inches, AMOLED, 1080 x 2340 pixels
• Battery: Li-Po 5000 mAh, non-removable
• Processor: Qualcomm SM8250 Snapdragon 865+
• RAM: 12GB/16GB
• Storage: 256GB/512GB
• Main Camera: Dual 64 MP + 16 MP
• Front Camera: 20 MP motorized pop-up
• Sensors: Fingerprint (under display), accelerometer, gyro, proximity, compass

Instructions for Replacing Lenovo Legion Pro 5G Parts

Follow these detailed instructions to replace the parts of your Lenovo Legion Pro 5G:

1. Display

• Turn off the device and disconnect any peripheral devices.
• Use a heat gun or hairdryer to soften the adhesive around the edges of the screen.
• Carefully use a plastic opening tool to lift the screen from the body of the phone.
• Disconnect the display cables from the motherboard.
• Remove the old display and replace it with the new one by reconnecting the display cables.
• Apply new adhesive around the edges of the screen and press it firmly into place.
• Turn on the device to ensure the display is functioning properly.

2. Battery

• Turn off the device for safety.
• Remove the back cover of the phone using a plastic opening tool.
• Disconnect the battery connector from the motherboard.
• Carefully remove the battery adhesive strips to take out the old battery.
• Place the new battery in the compartment and reconnect the battery connector.
• Close the back cover securely.
• Power on the device to ensure the new battery is functioning.

3. Main Camera

• Power off the phone and remove the back cover.
• Locate the main camera module on the motherboard.
• Disconnect the camera module connector gently using a plastic spudger.
• Remove the screws securing the camera module in place.
• Replace the old camera with the new one and fasten it with the screws.
• Reconnect the camera module connector to the motherboard.
• Replace the back cover and power on the phone to test the new camera.

4. Front Camera (Motorized Pop-Up)

• Switch off the device and remove the back cover using a suction tool.
• Identify the motorized front camera module and disconnect its connector.
• Remove any screws securing the motorized mechanism.
• Lift out the old front camera and motor assembly carefully.
• Insert the new camera and motor assembly and secure it with screws.
• Reconnect the new front camera connector to the motherboard.
• Replace the back cover and power on your device to ensure proper functionality.

By following these detailed steps, you can successfully replace various components of your Lenovo Legion Pro 5G. Ensure to handle all parts with care and power off the device before performing any replacements.