Technical Characteristics of Lenovo S5 Pro L58041 Repuestos
Battery
Type: Li-Po 3500 mAh, non-removable
Voltage: 3.85V
Chemistry: Lithium Polymer
Screen
Type: IPS LCD
Size: 6.2 inches
Resolution: 1080 x 2246 pixels
Protection: Corning Gorilla Glass (unspecified version)
Camera
Main Camera: 12 MP, f/1.8, 1.4µm, Dual Pixel PDAF
Seconda...
Technical Characteristics of Lenovo S5 Pro L58041 Repuestos
Battery
Type: Li-Po 3500 mAh, non-removable
Voltage: 3.85V
Chemistry: Lithium Polymer
Screen
Type: IPS LCD
Size: 6.2 inches
Resolution: 1080 x 2246 pixels
Protection: Corning Gorilla Glass (unspecified version)
Camera
Main Camera: 12 MP, f/1.8, 1.4µm, Dual Pixel PDAF
Secondary Camera: 20 MP, f/2.6, AF
Selfie Camera: 20 MP, f/2.2, 0.9µm
Memory
Internal: 64GB 6GB RAM, 128GB 6GB RAM
Card slot: microSD, up to 256GB
Instructions for Replacing Lenovo S5 Pro L58041 Repuestos
Preparation
Before starting, ensure that you have the following tools and materials:
- Small Phillips and flathead screwdrivers
- Plastic opening tools
- Suction cup
- Spudger
- Tweezers
- ESD-safe work mat and wrist strap
Step-by-Step Replacement Instructions
1. Power off the device
Hold the power button and select ""Power off"" from the menu. Ensure the device is completely turned off before proceeding.
2. Remove the SIM tray
Using a SIM ejector tool, remove the SIM card tray from the device to prevent damage during disassembly.
3. Open the device
- Use a suction cup on the screen's lower part to create a gap between the back cover and the frame.
- Insert a plastic opening tool into the gap and gently work around the edges to lift the back cover.
4. Disconnect the battery
- Locate the battery connector on the motherboard.
- Using a spudger, gently disconnect the battery connector to cut off power to the device.
5. Remove the old battery
- Peel off any adhesive strips securing the battery.
- Gently lift and remove the battery using a spudger.
- Be cautious not to puncture or bend the battery.
6. Install the new battery
- Place the new battery into the battery compartment.
- Reconnect the battery connector to the motherboard.
- Ensure the battery is securely seated and any adhesive strips are properly applied.
7. Replace the back cover
- Align the back cover with the frame.
- Press down gently around the edges to secure the back cover in place.
- Ensure there are no gaps between the cover and frame.
8. Power on the device
Hold the power button to turn on the device. Check that it functions properly and the new battery is recognized.
Congratulations! You have successfully replaced the repuestos of your Lenovo S5 Pro L58041. Dispose of the old parts responsibly and refer to the device's manual for any additional instructions or troubleshooting tips.
Less