Lenovo Vibe P1 spare parts

Technical Characteristics of Lenovo Vibe P1 Repuestos

The Lenovo Vibe P1 Repuestos are integral parts of the Lenovo Vibe P1 smartphone, noted for its excellent performance and durability. Here are some of the core characteristics:

• Screen: 1080 x 1920 pixels, 5.5 inches, IPS LCD capacitive touchscreen
• Battery: Non-removable Li-Po 5000 mAh battery
• Rear Camera: 13 MP, f/2.2, phase detection autofocus, dual-LED (dual tone) flash
• Front Camera: 5 MP, f/2.8
• Processor: Qualcomm MSM8939 Snapdragon 615
• Storage: 32 GB, expandable via microSD, up to 256 GB
• RAM: 2 GB RAM

Replacement Instructions for Lenovo Vibe P1 Repuestos

Disclaimer

Please note that you're doing this at your own risk. It is best to take caution when handling electronic devices and parts.

Steps to Follow

• Power off your Lenovo Vibe P1: Always ensure the device is powered off before starting any replacement or repair process to prevent any short circuits.
• Gather Your Tools: You will need a Phillips #00 Screwdriver, a plastic opening tool, and a spudger.
• Remove the Back Cover: Start by prying off the back cover with your plastic opening tool. Carefully work your way around the edges, releasing clips holding the cover in place.
• Unscrew and Remove Metal Plate: After removing the back cover, locate the metal plate protecting the motherboard. Unscrew the screws using the Phillips #00 Screwdriver and keep them in a safe place.
• Disconnect the Battery Connector: Before removing the battery, make sure you disconnect the battery connector from the motherboard.
• Remove the Battery: Use your spudger to lift out the battery.
• Replace the Component: Now proceed to replace whichever 'repuesto' needs changing - whether it's the screen, the camera, or the battery itself. Each component will have its own set of screws or connectors that need to be detached before removal.
• Reassemble: Once the replacement is complete, follow the steps in reverse order to reassemble your device.

Additionally, remember to properly dispose of your old parts and recycle them if possible. Following these steps should allow for a successful replacement of your Lenovo Vibe P1 repuestos.