Lenovo Vibe Shot Z90-7 spare parts

Technical Characteristics of Lenovo Vibe Shot Z90-7 Repuestos

The Lenovo Vibe Shot Z90-7 is a powerful smartphone with high-quality internal components, or 'repuestos'. Here are the key technical specifications:

• Display: 5.00-inch (1080x1920)
• Processor: Qualcomm Snapdragon 615
• Front Camera: 8MP
• Rear Camera: 16MP
• RAM: 3GB
• Storage: 32GB
• Battery Capacity: 3000mAh
• OS: Android 5.0.2

Replacing Lenovo Vibe Shot Z90-7 Repuestos

Replacing internal components of the Lenovo Vibe Shot Z90-7 requires patience and precision. Ensure you have the correct tools before proceeding.

Tools Needed:

• A set of precision screwdrivers
• A plastic or metal spudger
• Fine-tipped tweezers
• Suction cup (for screen removal)

Steps:

Follow these steps carefully to replace your Lenovo Vibe Shot Z90-7 repuestos:

Step 1: Power off the device and remove the SIM card tray.

Step 2: Use a heat gun or a blow drier to soften the adhesive holding the back cover. Start from one end and gently pry open with a spudger.

Step 3: Identify the screws securing the component you wish to replace (e.g., battery, camera, motherboard). Use the appropriate screwdriver to remove these.

Step 4: Use a spudger to lift the component carefully. It may be connected to the motherboard by a ribbon cable - remove this with tweezers.

Step 5: Replace the faulty component with the new one. Ensure all ribbon cables are connected correctly.

Step 6: Reassemble the device by reversing the steps.

Final Note: Proceed with patience and care. If you feel unconfident at any step, consult a professional. It may be more prudent to pay for professional repairs than risk further damage to your phone.