Lenovo Z6 Pro spare parts

Technical Characteristics of Lenovo Z6 Pro Replacement Parts

The Lenovo Z6 Pro is equipped with high-quality components that ensure its top performance. Below are the main replacement parts and their technical specifications:

• Display Screen: Super AMOLED, 6.39 inches, resolution 1080 x 2340 pixels (FHD+)
• Battery: Li-Po 4000 mAh, non-removable
• Rear Camera: Quad-camera setup: 48 MP (wide), 8 MP (telephoto), 16 MP (ultrawide), 2 MP (dedicated video camera)
• Front Camera: 32 MP, f/2.0
• Motherboard: Qualcomm Snapdragon 855, Octa-core processor
• Fingerprint Sensor: Under-display optical sensor

Instructions on How to Replace Lenovo Z6 Pro Repuestos

1. Replacing the Display Screen

To replace the display screen of the Lenovo Z6 Pro, follow these steps:

• Power off your device and remove the SIM card tray.
• Use a heat gun or a hairdryer to soften the adhesive around the edges of the screen.
• Carefully insert a plastic pry tool between the screen and the frame to lift the display.
• Disconnect the display connector from the motherboard.
• Remove the old display screen and replace it with the new one, connecting the display connector to the motherboard.
• Secure the new display screen in place and power on your device to ensure proper installation.

2. Replacing the Battery

Follow these steps to replace the battery in your Lenovo Z6 Pro:

• Power off the device and remove the SIM card tray.
• Use a suction cup to lift the back cover carefully, starting from the edges. A pry tool may be needed to help separate the back cover from the frame.
• Locate and disconnect the battery connector from the motherboard.
• Remove any adhesive or screws holding the battery in place.
• Carefully lift the battery out of the device.
• Place the new battery in the same position, secure it with screws or adhesive, and reconnect the battery connector to the motherboard.
• Reattach the back cover of the device and power it on to test the new battery.

3. Replacing the Rear Camera

To replace the rear camera module, proceed as follows:

• Power off the device and remove the SIM card tray.
• Detach the back cover using a suction cup and a pry tool to create a gap, then carefully lift it off.
• Disconnect the battery connector to ensure safety.
• Locate the rear camera module on the motherboard and disconnect the camera connectors.
• Remove the screws securing the camera module, then carefully remove the old camera.
• Install the new rear camera module by securing it with screws and connecting the camera connectors to the motherboard.
• Reconnect the battery connector, reattach the back cover, and power on the device to verify that the new camera is functioning properly.

Make sure to handle all components gently and use appropriate tools to avoid damaging sensitive parts. If you are not confident in performing these replacements, it is recommended to seek professional assistance.

These detailed instructions should help you successfully replace parts on your Lenovo Z6 Pro, ensuring it remains in excellent working condition.