LG G Flex 2 H950 H955 spare parts

Technical Characteristics of LG G Flex 2 H950 H955 Repuestos

The LG G Flex 2 H950 H955 Repuestos is a unique smartphone featuring a curved design for a more immersive viewing experience. Here are the detailed technical characteristics:

• Processor: Qualcomm Snapdragon 810
• Display: 5.5 inch Full HD P-OLED
• Storage: 16GB / 32GB, expandable via microSD
• RAM: 2GB / 3GB
• Camera: 13MP rear camera, 2.1MP front camera
• Battery: 3000mAh, non-removable
• Operating System: Android 5.0.1 Lollipop, upgradable to 6.0.1 Marshmallow

Instructions on How to Replace LG G Flex 2 H950 H955 Repuestos

Replacing parts on the LG G Flex 2 H950 H955 implies a careful and cautious handling of the device. Follow these step-by-step instructions:

Tools Required

• Phillips #00 Screwdriver
• Plastic Opening Tools
• Tweezers
• Spudger

Replacement Steps

Note: This process is general, and the exact steps can vary based on the part to be replaced (for example, battery, screen, etc.)

1. Switch off the phone and remove the SIM card tray.
2. Remove the two screws at the bottom of the device, enabling you to lift the back cover.
3. Use the plastic opening tool to gently pry open the back cover from the rest of the device. Keep detaching until the entire cover is removed.
4. Identify the part you need to replace (battery, camera, etc.). It will be held in place by screws and/or connectors.
5. Use the appropriate screwdriver to remove screws and the spudger to disconnect any connectors. For the battery, there will also be adhesive to remove.
6. Carefully replace the faulty component with the new one.
7. Reconnect any connectors, replace screws, and reapply adhesive if necessary.
8. Reattach the back cover, ensuring it clicks into place, and replace the two screws you removed earlier.
9. Reinsert the SIM tray and turn on your phone.

With these steps, you should be able to replace parts on your LG G Flex 2 H950 H955 Repuestos.