LG G4 H815 spare parts

Technical Specifications of LG G4 H815 Repuestos

The LG G4 H815, frequently known as the Repuestos, is a sophisticated smartphone device which has a broad range of technical specifications designed to optimize user experience.

• Operating System: Android OS, v5.1 (Lollipop), upgradable to v6.0 (Marshmallow)
• Processor: Qualcomm MSM8992 Snapdragon 808
• Storage Capacity: 32 GB, 3 GB RAM
• Screen Size: 5.5 inches (~72.5% screen-to-body ratio)
• Resolution: 1440 x 2560 pixels (~538 ppi pixel density)
• Primary camera: 16 MP, f/1.8, 28 mm
• Battery Capacity: Removable Li-Ion 3000 mAh battery

Replacement Instructions for LG G4 H815 Repuestos

Note: Before you begin the replacement process, ensure you have a clean workspace and the necessary tools including a Phillips-head screwdriver, plastic opening tool, and tweezers.

Step 1: Remove Battery Cover and Battery

Turn off the device before starting the replacement to reduce the risk of harming the device. Gently remove the back battery cover by prying it open with a plastic opening tool. Then, lift the battery out directly.

Step 2: Remove Screws and Rear Housing

With the battery removed, you'll notice 11 screws securing the rear housing to the front assembly. Carefully remove these with a Phillips-head screwdriver. After all the screws are removed, use the plastic opening tool or your nails to gently pry open the rear housing.

Step 3: Disconnect and Remove the Motherboard

After removing the rear housing, you'll see the motherboard fixed onto the front housing. First, you will need to disconnect all the connectors attached to the motherboard, including the digitizer, the LCD, and the camera connectors. Use tweezers to carefully disconnect these connectors. Once all connectors are disconnected, you can gently lift the motherboard out of the device.

Step 4: Replace Damaged Parts

With the motherboard removed, you can replace any damaged parts. If you're replacing the screen, remove the broken display and replace it with a new one. If the problem lies in the battery, replace the old one with a new battery.

Step 5: Reassemble the Device

Once the damaged parts have been replaced, you can now start reassembling the device. Follow the disassembly instructions in order, but this time in reverse. Connect all connectors back into the motherboard, then, place the motherboard back into the device and secure with screws. Then, replace the battery, secure the back cover, and turn on the device. If everything has been done correctly the device should boot up seamlessly.

Remember, take your time with these steps and if you find it overly complex, seek the help of a professional to ensure parts are replaced correctly.