LG G8S Thinq spare parts

Technical Characteristics of LG G8S Thinq Repuestos

The LG G8S Thinq Repuestos, also known as the spare parts for the LG G8S Thinq smartphone, include several important components. Here are some specific aspects of these parts:

• Screen: OLED capacitive touchscreen, 16M colors. 6.21 inches, (~82.4% screen-to-body ratio).
• Resolution: 1080 x 2248 pixels (~401 ppi density)
• Processor: Qualcomm SM8150 Snapdragon 855 (7 nm)
• Memory: 128GB 6GB RAM
• Battery: Li-Po 3550 mAh, non-removable
• Rear Camera: Triple setup with 12 MP, 12 MP, and 13 MP sensors.
• Front Camera: 8 MP, f/1.9, 26mm (wide), ToF 3D camera

Instructions for Replacing LG G8S Thinq Repuestos

Precautions

Ensure you have the right tools for the job, including micro-screwdrivers and plastic spudging tools. Always be cautious when dealing with sensitive electronic components. Be extra careful not to damage your device during the replacement process.

Step-by-step Guide

1. Turn off your LG G8S Thinq and remove the SIM card tray.
2. Warm up the edges of the back cover to loosen the adhesive. Use a plastic spudging tool to gently pry the back cover away from the phone. Be cautious not to damage any components inside.
3. Remove all visible screws to detach the cover panel. This will expose the motherboard and battery.
4. Disconnect the battery flex cable gently using a plastic spatula tool. This ensures the phone does not accidentally power on during repairs, potentially causing damage.
5. Proceed to replace the necessary components cautiously, ensuring the replacements are the correct LG G8S Thinq Repuestos.
6. Reconnect the battery flex cable, reassemble the inner cover, and put the screws back in their respective places.
7. Finally, reattach the back cover. Ensure it fits perfectly and adheres to the adhesive properly. You should feel it snap into place.
8. Turn on the device and verify if the replacement parts are functioning correctly.