LG GW520 spare parts

    There are 2 products.

    Technical Specifications of LG GW520 Repuestos

    The LG GW520 Repuestos is designed with the following features:

    • Display: 240 x 400 pixels, 2.8 inches
    • Memory: microSD, takes up to 16GB, 40MB included
    • Camera: 3.15 MP, LED flash
    • Battery: Li-Ion 900 mAh, up to 500 h (2G) / up to 500 h (3G) stand-by time, up to 5 h 30 min (2G) / up to 5 h (3G) talk t...

    Technical Specifications of LG GW520 Repuestos

    The LG GW520 Repuestos is designed with the following features:

    • Display: 240 x 400 pixels, 2.8 inches
    • Memory: microSD, takes up to 16GB, 40MB included
    • Camera: 3.15 MP, LED flash
    • Battery: Li-Ion 900 mAh, up to 500 h (2G) / up to 500 h (3G) stand-by time, up to 5 h 30 min (2G) / up to 5 h (3G) talk time

    Instructions to Replace LG GW520 Repuestos Parts

    Disabling Phone and Removing Battery

    Before you start, ensure the phone is powered off. In case, the repuestos battery needs replacement, follow the steps below:

    • Turn over the phone and locate the small indent at the bottom of the phone.
    • Use your fingernail to gently lift and remove the back cover.
    • Lift the battery from the indents located at the top-end of the battery compartment.

    Replacing the Display

    Should the phone's repuestos display screen need replacement, please adhere to the following directives:

    • Remove the two screws at the bottom of the phone.
    • Using a plastic tool, gently remove the front frame from the back housing.
    • Once the frame is detached, the display is visible. Remove it carefully using the tool and replace with a new one.
    • Reassemble the device following the steps in reverse.

    Replacing the Memory Card

    If you need to replace the repuestos memory card, follow these steps:

    • Open the microSD slot located on the side of the device.
    • Gently pull out the memory card.
    • Insert the new memory card into the slot, ensuring it is securely in place.

    Replacing the Camera Unit

    For replacing the repuestos camera, follow these steps:

    • Remove the back cover and battery as explained above.
    • Once you have exposed the camera lens, carefully use a screwdriver to remove the lens from the back housing.
    • Insert the new camera lens into the space, ensuring secure fit.
    • Reassemble the device by replacing the battery and the back cover.

    Please take note, all these instructions are to be followed at your own risk. If you're not sure about performing these tasks yourself, we recommend seeking help from a professional.

    Less
    More
    Showing 1 - 2 of 2 items