LG Magna H502F spare parts

    There are 10 products.

    Technical characteristics of LG Magna H502F Repuestos

    The LG Magna H502F smartphone comes with various components, also known as repuestos or spare parts, that are crucial for its functionality. Here are some of the main features:

    • Display: LG Magna H502F features a 5.0 inches IPS LCD capacitive touchscreen with a resolution of 720x1280 pixels...

    Technical characteristics of LG Magna H502F Repuestos

    The LG Magna H502F smartphone comes with various components, also known as repuestos or spare parts, that are crucial for its functionality. Here are some of the main features:

    • Display: LG Magna H502F features a 5.0 inches IPS LCD capacitive touchscreen with a resolution of 720x1280 pixels.
    • Battery: This device is powered by a non-removable Li-Ion 2540mAh battery.
    • Memory: It is equipped with 1GB RAM and 8GB internal storage, expandable up to 32GB via microSD card.
    • Camera: This device is fitted with an 8MP rear camera and 5MP front-facing camera.

    Instructions on how to replace LG Magna H502F Repuestos

    Replacing components on the LG Magna H502F can be done with careful attention and the right tools. Below, you'll find a step-by-step guide on how to replace the repuestos:

    Tools Needed:

    • Screwdriver
    • Plastic opening tools
    • Tweezers

    Steps:

    1. Switch off the phone: Always ensure the device is turned off before starting any repair.
    2. Remove the back cover: Use your fingernail or a plastic opening tool to remove the back cover of the phone.
    3. Remove the battery: Lift the battery up and away from the phone.
    4. Remove the screws: Use a screwdriver to remove the screws that secure the inner components of the phone.
    5. Unplug the connector: Detach any connectors interfacing the circuit board with the component to be replaced.
    6. Remove the spare part: Carefully remove the faulty component or part from the device.
    7. Install the new part: Replace the old component with the new spare part.
    8. Reassemble the phone: Screw back all the removed screws, reconnect the removed connectors, place back the battery and attach the back cover.
    9. Switch on the phone: Power on the device to verify that it functions correctly with the new replacement.

    Remember, always proceed with caution while performing these steps to avoid causing any further damage to the device.

    Less
    More
    Showing 1 - 10 of 10 items