LG Q6 M700A

Technical Specifications of LG Q6 M700A

Brand: LG
Model: Q6 M700A
Screen Size: 5.5 inches
Display Resolution: 1080 x 2160 pixels
Processor: Qualcomm MSM8940 Snapdragon 435
RAM: 3GB RAM
Storage: 32GB internal storage, expandable via microSD
Camera: 13MP rear, 5MP front
Battery: 3000mAh non-removable

Instructions on How to Replace LG Q6 M700A

Before start, ensure that you have the necessary tools such as small Phillips screwdriver, plastic opening tools, spudger and heat gun/blow dryer.

Step 1: Power off your LG Q6 M700A

Press and hold the power button and select 'Power off' to turn off the device.

Step 2: Remove the SIM card tray

Locate the SIM card tray and eject it carefully.

Step 3: Heat the back cover

Apply heat to the edges of the back cover using a heat gun or blow dryer to soften the adhesive.

Step 4: Removing the back cover

Use a plastic opening tool to pry open the back cover starting from the bottom edge and work your way around to remove the back cover.

Step 5: Remove the Battery

• Remove the screws surrounding the battery compartment with the Phillips screwdriver.
• Use the spudger to lift up the battery connector from its socket on the motherboard.
• Remove the battery.

Step 6: Replace the Battery

• Place the new replacement battery in the compartment.
• Reconnect the battery connector.
• Secure the battery with the screws that were previously removed.

Step 7: Reattach the back cover

Align the back cover with the device and press it into place. The remaining heat should help re-seal the adhesive.

Step 8: Turn on the device

Press and hold the power button to turn on the device and check if the new battery is functioning correctly.