LG Viewty KU990 spare parts

Technical Characteristics of LG Viewty KU990

The LG Viewty KU990, also known as LG Viewty is a versatile mobile device with a wide range of features that cater to the needs of mobile phone users. It was released in the year 2007.

Key Features:

• Display: 3.0 inches TFT resistive touchscreen, 256K colors
• Resolution: 240 x 400 pixels
• Memory: Internal - 100 MB, microSD (TransFlash), up to 2 GB, 2 GB included
• Camera: Primary - 5 MP, autoflash, video capability
• Network: GSM / HSPA
• Connectivity: Bluetooth 2.0, A2DP, USB 2.0
• Battery: Removable Li-Ion 1000 mAh battery

Instruction for Replacing LG Viewty KU990 Repuestos (Parts)

Please note that while these are general instructions, different parts might require slightly different methods. Always consult a smartphone repair professional if unsure.

Tools Needed:

• Small Phillips Screwdriver
• Pry Tool

Procedure:

Step 1: Turn off the phone as a safety precaution and remove the back cover, battery, and SIM card.

Step 2: Using the Phillips screwdriver, remove the six screws on the back of the phone.

Step 3: With the edge of your pry tool, carefully pry off the back frame of the phone.

Step 4: You would now have access to the inner parts. Be careful not to dislodge any connectors.

Step 5: Depending on which part you need to replace (e.g., speaker, camera, charging port), locate the part and carefully remove any screws securing it.

Step 6: Carefully lift the part out and replace it with the new one. Make sure it is seated correctly.

Step 7: Reinstall any screws and reconnect any connectors.

Step 8: Reassemble the phone by first snapping the back frame in place, then reinstalling the six screws, and finally placing the battery, SIM card, and back cover.

Step 9: Power on the device to ensure everything works as expected. If there are issues, revisit the steps above to ensure everything was done correctly or seek professional assistance.