Meizu 16T repuestos

Technical Characteristics of Meizu 16T Repuestos

The Meizu 16T Repuestos is a set of replacement components for the Meizu 16T smartphone. These components are designed to perfectly fit and function with your Meizu 16T, ensuring seamless operation of your device.

Specifications

• Screen: The kit includes a 6.5-inch, full-HD+ AMOLED replacement screen offering a resolution of 1080x2232 pixels.
• Battery: A 4500mAh high-capacity replacement battery designed to offer long hours of seamless performance.
• Camera: Replacement set offers 12MP+5MP+8MP rear camera modules and a 16MP front-facing camera module.
• Charger Connector: A USB Type-C charger connector that supports fast charging.

Instructions for Replacing Meizu 16T Repuestos

Please Note: Proceed with the repair only if you are confident with your technical skills. If not, seek professional help.

Screen Replacement

• First, power off your Meizu 16T device.
• Carefully remove the back cover using a pry tool.
• After removing the back cover, detach the Connector Flex Cable using a screwdriver.
• Take out the damaged screen, and install your new screen carefully making sure it fits correctly and is firmly installed.
• Reconnect the Connector Flex Cable.
• Reattach the back cover and power on the device to check the functioning of the new screen.

Battery Replacement

• Power off your device and remove the back cover as explained above.
• Remove the screws securing the battery connector cover and the cover itself.
• Detach the battery connector and remove the battery using a pry tool.
• Install the new battery, connect the battery connector, and reinstall the connector cover.
• Reattach the back cover, power on the device and check the new battery's performance.

Camera Module Replacement

• Follow the same initial steps – power off the device and remove the back cover.
• Locate the camera module and carefully remove the screws securing it.
• Replace the old camera module with the new one from the Repuestos kit.
• Retighten the screws, replace the back cover, power on the device, and test the new camera module.