Meizu Meila MX4 Pro spare parts

Technical Specifications of the Meizu Meila MX4 Pro Repuestos

The Meizu Meila MX4 Pro Repuestos (parts) consist of the following main components:

• Screen: LG-made 5.5-inch panel with a resolution of 2560 x 1536 pixels.
• Processor: Samsung Exynos 5430, Octa-core (4x2.0 GHz Cortex-A15 & 4x1.5 GHz Cortex-A7).
• Memory: 3GB RAM and internal storage options of 16GB, 32GB, and 64GB.
• Battery: Non-removable Li-Po 3350 mAh battery.
• Camera: Rear - 20.7 MP, Front - 5 MP.

Instructions for Replacing Meizu Meila MX4 Pro Repuestos

Tools Necessary:

• Screws driver
• Pry opener
• Tweezers

Replacing the Screen:

DISCLAIMER: Perform these operations at your own risk. We are not responsible for any damage caused during the replacement process.

1. Turn off the device and remove the SIM card tray.
2. Use the screwdriver to remove the screws at the bottom of the device.
3. Use the pry tool to carefully open the back cover from the bottom.
4. Once the back cover is removed, use the screwdriver to remove all the visible screws.
5. Remove the battery connection and the battery.
6. Disconnect the cables connected to the motherboard.
7. Remove the old screen carefully.
8. Place the new screen and connect it to the motherboard.
9. Reconnect all the cables and install the battery back.
10. Fix all the screws back and attach the back cover properly.
11. Turn on the device to check whether the new screen works fine.

Be sure to turn off the phone when replacing parts and work on a clean surface to safe keep the screws and small parts. This manual does not guarantee the perfect operation of the mobile, but it facilitates in carrying out a careful repair process.