Meizu Meila MX4 spare parts

Meizu Meila MX4 Technical Characteristics

The Meizu Meila MX4 is a lightweight smartphone featuring a robust body structure and fantastic usability. It is an excellent representative of its brand, showcasing advanced features, including:

• 5.36-inch Display with 1152 x 1920 pixels Resolution.
• MediaTek MT6595 Processor.
• 2 GB RAM and 16/32/64 GB Internal Storage.
• 20.7 MP Rear Camera accompanied by a 2 MP Front Camera.
• 3100 mAh Non-removable Battery.

Replacing the Meizu Meila MX4 Repuestos

You will need the right tools like a screwdriver, plastic opening tools, tweezers, spudger, and a heat gun along with the Meizu Meila MX4 repair parts.

Procedure:

Step 1: Power off your Meizu Meila MX4.

Make sure your phone is entirely switched off before commencing any disassembly process.

Step 2: Remove the back cover.

Use the plastic opening tools to gently wedge the back cover open. Be careful not to apply excessive force as it may damage the phone's plastic.

Step 3: Unscrew the screws keeping the mid frame intact.

Utilize your screwdriver to remove the screws on both the top and bottom of the phone. Make sure these screws are kept somewhere safe, so they don't get lost.

Step 4: Remove the rear panel and disconnect the battery.

After removing the screws, lift the rear panel carefully. Disconnect the battery connector using the spudger.

Step 5: Remove the battery.

Gently pry up the battery using a plastic opening tool. Be careful to avoid puncturing the battery itself.

Step 6: Install the new parts.

Install the new parts and follow the previous steps in reverse order to reassemble your device.

Please exercise caution while replacing parts of your device, as the process can damage sensitive components if not done properly.