Meizu Meilan E3 M851H spare parts

Technical characteristics of Meizu Meilan E3 M851H Repuestos

The Meizu Meilan E3 M851H embraces a variety of impressive technical specifications. These include:

• Screen: It features a vibrant 5.99-inch IPS LCD Capacitive Touchscreen with 1080 x 2160 pixels and an impressive display for its category.
• Processor: This model operates on a powerful Qualcomm SDM636 Snapdragon 636 Octa-core processor.
• Operating System: It runs on Android 7.1.2 (Nougat), Flyme UI.
• Memory: For memory, it boasts of 64GB 6GB RAM, 128GB 6GB RAM with option for expansion via microSDXC.
• Camera: It packs Dual 12 MP, f/1.9, 1/2.55", 1.4µm, dual pixel PDAF + 20 MP, 1/2.8", 1.0µm, PDAF rear cameras and an 8 MP, f/2.0 front camera.
• Battery: It is powered by a non-removable Li-Ion 3360 mAh battery.

Instructions to Replace Meizu Meilan E3 M851H Repuestos

Below are the detailed instructions on how to replace the parts of Meizu Meilan E3 M851H:

Materials Needed

• Replacement parts for Meizu Meilan E3 M851H
• Small Phillips Screwdriver
• Thin pry tool or spudger
• Quality adhesive for reattachment

Screen Replacement

Before starting, make sure to turn off your device. Then follow these steps:

• Begin by removing the SIM card tray.
• Use a heat gun or hair dryer to slightly heat up the edges of the screen to loosen the adhesive.
• Insert a thin pry tool or spudger between the screen and the frame and gently separate the two, being careful not to damage the screen.
• Disconnect the screen connector from the motherboard.
• Now, connect the new screen to the motherboard.
• Reheat the frame's edges and press the new screen onto it. Secure it with clamps until the adhesive completely dries.

Battery Replacement

Here's how to replace the battery:

• Start by removing the back cover of the device using the pry tool.
• Unscrew the battery connector's screws using the screwdriver. Then disconnect the connector from the motherboard.
• Next, carefully remove the battery from the device, be careful not to damage any surrounding parts.
• Place the new battery into the device and connect it to the motherboard. Screw back the connector.
• Finally, reattach the back cover onto the device.

Please note that the above processes must be performed cautiously to avoid any possible damage. If any issue is encountered, seek help from a professional.