Mobyle battery

Technical Characteristics of Baterías Móviles (Mobile Batteries)

Mobile batteries, also known as Baterías Móviles, offer a portable source of power, which is vital to the functionality and utility of any smartphone. Below are some key features and specifications:

• Energy Capacity: This is often measured in milliampere-hours (mAh). Modern smartphones typically require batteries with an energy capacity ranging from 2000 to 5000 mAh.
• Type: There are different types of batteries. Lithium-Ion (Li-Ion) and Lithium-Polymer (Li-Po) are common types used in smartphones due to their high energy efficiency and slow loss of charge when not in use.
• Voltage: The typical voltage for a mobile phone battery is 3.7 volts.
• Size and Weight: These vary depending on the model of the phone. However, engineers try to limit the size and weight to keep the phones as light and portable as possible.

Instructions on How to Replace Baterías Móviles

Note: Battery replacement should be conducted with caution. If you are not confident, consider seeking professional help.

Step 1: Gather your Tools

You will need a set of precision screwdrivers, a prying tool, and a new battery for your specific mobile phone model.

Step 2: Power off the Phone

Ensure your phone is fully powered off before beginning the replacement process.

Step 3: Remove the Case

Use the prying tool to gently remove the back case of your phone. Some phones might require unscrewing; in such cases, use the appropriate precision screwdriver.

Step 4: Disconnect the Battery

Usually, the Baterías Móvil is connected to the phone by a connector that snaps into the phone's mainboard. Carefully pry this connector off.

Step 5: Remove the Old Battery

With the battery disconnected, gently remove it from its housing. Some batteries could be held down with adhesive, exercise caution while prying it off.

Step 6: Install the New Battery

Place the new battery in the housing area and connect it to the mobile phone's mainboard. Make sure the connector snaps into place securely.

Step 7: Reassemble the Phone

Reattach the back case or screw it in as necessary, ensure all screws are snug but not overly tightened.

Once this is done, power your phone on to ensure everything is in working order.