Moto G30 Spare Parts

Technical Characteristics of Moto G30 Repuestos

The Moto G30 Repuestos are premium components designed for restoring the functionality of a damaged Moto G30 smartphone. Below are some of the notable technical characteristics.

• Display: 6.5 inches, 720 x 1600 pixels, IPS LCD
• Battery: Li-Po 5000 mAh, non-removable
• Rear Camera: 64 MP, f/1.7, (wide), 1/1.97", 0.7µm, PDAF
• Front Camera: 13 MP, f/2.2, (wide), 1/3.1", 1.12µm
• Processor: Qualcomm SM6115 Snapdragon 662 (11 nm)
• Memory: RAM – 4GB/6GB, ROM – 64GB/128GB expandable with MicroSDXC

Instructions on How to Replace Moto G30 Repuestos

Replacing the Moto G30 Repuestos involves careful step-by-step procedures to ensure no damages occur. Note: You are advised to seek professional advice if you don't have technical skills.

Equipment Needed

• Screwdriver set
• Plastic pry-tool
• Heat gun or hair dryer

Steps to Replace Moto G30 Repuestos

Below are step-by-step instructions on how to replace Moto G30 Repuestos.

• Power off the phone and remove the SIM card tray.
• Heat the edges of the phone for about two minutes to soften the adhesive.
• Insert the plastic pry-tool between the screen and the frame. Slide it around all edges to loosen the adhesive.
• Slowly lift up the screen. Do not rush as you could damage the flex cable.
• Disconnect the flex cable connecting the screen and the main board.
• Remove the screws keeping the phone frame in place using the screwdriver.
• Lift the mainboard cover and disconnect the battery connector.
• You can now replace the faulty components with the new Moto G30 Repuestos following the disassembling order.
• Once replaced, reassemble the phone; reattach the connectors, replace screws, reattach the screen and the SIM card tray, and power-on your device to see if the problem is fixed.

Note: If the issue persists, consider seeking professional help.