Motorola MB860 spare parts

    There are 3 products.

    Motorola MB860 Repuestos Technical Characteristics

    The Motorola MB860, also known as the Atrix 4G, is a highly reliable smartphone equipped with quality components. Understanding these repuestos or replacement parts can help in conducting efficient repairs and replacements.

    • Screen: The device has a 4.0-inch TFT capacitive touchscreen with a res...

    Motorola MB860 Repuestos Technical Characteristics

    The Motorola MB860, also known as the Atrix 4G, is a highly reliable smartphone equipped with quality components. Understanding these repuestos or replacement parts can help in conducting efficient repairs and replacements.

    • Screen: The device has a 4.0-inch TFT capacitive touchscreen with a resolution of 540 x 960 pixels.
    • Processor: This model operates on a Dual-core 1.0 GHz Cortex-A9 processor.
    • Memory: The Motorola MB860 features an internal memory space of 16 GB, 1 GB RAM, which can be enhanced with a microSD, up to 32 GB.
    • Camera: The smartphone has a 5 MP, AF main camera with LED flash, and a VGA selfie camera.
    • Battery: The Atrix 4G is powered by a Non-removable Li-Po 1930 mAh battery.

    Instructions to Replace Motorola MB860 Repuestos

    Tools Needed

    You will require the following tools for the replacement process: screwdriver, pickering tools, heat gun, plastic opening tools.

    Step-by-Step Guide to Replacement

    Please follow the steps below in order:

    1. Power off your device: Always start the process by powering the device off to prevent electrical injuries or internal damage.
    2. Remove the back cover and battery: Use your fingernail or a plastic opening tool to gently pry off the back cover followed by the battery.
    3. Remove the lower bracket: Unscrew the lower bracket and set it aside.
    4. Gently tease the ribbon cable: Use a plastic opening tool to disconnect the ribbon cable connecting the main body of the phone to the display assembly.
    5. Remove the broken part: Use a heat gun to loosen adhesive, if necessary. Be careful not to overheat the device as it may cause irreversible damage.
    6. Install the new part: Follow the removal process in reverse to install the new part. Make sure that all screws are securely tightened and all ribbon cables are connected.
    7. Test the device: After assembly, switch on your device to ensure all parts are working correctly.

    Note: It is recommended to seek professional assistance if you're not confident in replacing parts by yourself, to avoid causing further damage to your device.

    Less
    More
    Showing 1 - 3 of 3 items