Motorola Moto E XT1021 XT1022 XT1025 spare parts

Technical Characteristics of Motorola Moto E XT1021 XT1022 XT1025

The Motorola Moto E XT1021 XT1022 XT1025 is a low-cost yet high-performing Android phone. Its specifications include:

• Processor: Qualcomm MSM8210 Snapdragon 200
• Display: 4.3 inches, 540 x 960 pixels, Corning Gorilla Glass 3
• Storage: 4GB internal, expandable up to 32GB via microSD card,
• RAM: 1GB
• Operating System: Android 4.4.2 (KitKat), upgradable to 5.1 (Lollipop)
• Battery: Li-Ion 1980 mAh, Non-removable
• Camera: 5 MP, f/2.4

Instructions for Replacing Motorola Moto E XT1021 XT1022 XT1025 Repuestos

Please ensure you have the correct replacement parts before beginning this process. If you feel uncomfortable performing these steps, please seek the help of a professional.

Step 1: Power off your phone

Power off your Motorola Moto E by long-pressing the power button and selecting the 'Power Off' option. This is to avoid any short circuit during the replacement process.

Step 2: Remove the back cover

Start by removing the back cover. You can easily do this by inserting your thumbnail in the slot located on the bottom left edge of the phone, then pulling the cover up firmly.

Step 3: Disconnect the battery

One of the first rules of any electronics repair is to disconnect the power source to avoid any short circuit. Do this by disconnecting the battery connector from the motherboard.

Step 4: Replace the defective part

Depending on the part you're replacing, you may have to take apart more of the phone. Be cautious not to tear any flex cables or damage any parts during this process. Once you have access, carefully remove the old part and replace it with the new one.

Step 5: Re-assemble your phone

After replacing all defective parts, carefully re-assemble your phone in the reverse order you took it apart. Make sure all connectors are firmly seated and screws are tightened.

Step 6: Test

Now power on your device. If all went well, your device should be operating as expected with the new parts.

Should any issues arise, ensure everything was re-assembled correctly and consult with a professional if needed.