Motorola Moto E2 XT1526 XT1527 spare parts

Motorola Moto E2 XT1526 XT1527 Repuestos Technical Specifications

The Motorola Moto E2 model number XT1526 XT1527, also known as Moto E (2nd Gen), is a robust and reliable smartphone with the following technical specifications:

• Operating System: Android 5.0 Lollipop
• CPU: Quad-core 1.2 GHz Cortex-A53
• Memory: 8GB, 1GB RAM
• Screen: 4.5 inches, IPS LCD
• Resolution: 540 x 960 pixels
• Camera: 5 MP Rear, 0.3 MP Front
• Battery: Non-removable Li-Ion 2390 mAh

Instructions for Replacing Motorola Moto E2 XT1526 XT1527 Repuestos

Tools Needed

You would need the following tools to replace Motorola Moto E2 XT1526 XT1527 repuestos:

• Plastic Opening Tools
• Phillips #00 Screwdriver
• Spudger
• Tweezers

Step-by-Step Replacement Procedure

Note: Ensure that your Moto E2 is completely switched off and disconnected from any power source before you embark on the replacement process.

1. Using a plastic opening tool, gently pry open the rear cover of the smartphone.
2. Remove the battery by inserting the plastic opening tool in the small notch located at the bottom right side of the phone, slowly lift the battery.
3. Use the Phillips #00 Screwdriver to remove the 14 screws on the mid-frame.
4. Gently remove the mid-frame using the plastic opening tool.
5. With the mid-frame removed, you can access the motherboard where you can replace any damaged parts or repuestos.
6. Gently replace the damaged component with the new one. Use a spudger and tweezers if necessary.
7. Return the mid-frame to its original placement and screw it back in.
8. Replace the battery and ensure it is securely in place.
9. Finally, replace the rear cover of the smartphone. Press around the edges to snap it back into place.

Note: Always remember to ground yourself by touching a grounded metal object to discharge any static electricity before you touch any electronic components inside the device.