Motorola Moto E3 XT1700 spare parts

Motorola Moto E3 XT1700 Technical Specifications

The Moto E3 XT1700 is a reliable smartphone provided by Motorola. Below are its technical specifications:

• Processor: MediaTek MT6735P
• Memory: 1GB RAM
• Storage: 8GB internal (expandable via microSD)
• Display: 5.0" HD (720 x 1280 pixels)
• Camera: 8MP rear; 5MP front
• Battery: Removable Li-Ion 2800mAh
• Operating System: Android 6.0 Marshmallow

Instructions for Replacing Motorola Moto E3 XT1700 Repuestos

Follow these steps carefully to replace the Motorola Moto E3 XT1700 Repuestos:

Disassembly:

• Turn off the phone and remove the back cover.
• Remove the battery from the phone.
• Remove the screws securing the plastic cover with a screwdriver.
• Use a plastic tool to pry open the cover on the back of the phone. This reveals the motherboard.
• Disconnect the flex cables connected to the motherboard.

Part Replacement:

Depending on the repuesto part to be replaced, follow the suitable steps:

• Screen: Heat the edges of the display with a blow dryer. Use a plastic spudger to slowly lift the display off of the phone. Then, apply the new display and connect its cable to the motherboard.
• Battery: Simply remove the old battery and replace it with the new one.
• Camera: Disconnect the old camera module from the motherboard and then connect your new camera module.

Reassembly:

• Reconnect the flex cables on the motherboard.
• Replace the plastic cover and screw it back into place.
• Place the battery back inside the phone.
• Place the back cover and press until it clicks into place.

Note: Please be extra careful throughout the process.