Motorola Moto E6 Play Repuestos

Motorola Moto E6 Play Repuestos Technical Characteristics

The Motorola Moto E6 Play Repuestos is a capable smartphone with the following features:

• Display: 5.5 inches, 720 x 1440 pixels, IPS LCD
• Processor: Mediatek MT6739 (28 nm)
• Rear Camera: 13 MP, f/2.2, 1.12µm, AF
• Front Camera: 5 MP, f/2.2
• Ram: 2GB
• Storage: 32GB, expandable via MicroSD
• Battery: Removable Li-Po 3000 mAh battery

Instructions for Replacing Motorola Moto E6 Play Repuestos

Materials Required

• Replacement parts for Motorola Moto E6 Play Repuestos
• Screwdriver
• Prying tools
• Tweezers

Prepare your Workstation

Ensure that your work area is clean and well-lit. Ground yourself to prevent static electricity from damaging the electronic components.

Step 1: Remove the Back Cover

Use a prying tool to remove the back cover of the Motorola Moto E6 Play. Be gentle to avoid damaging the plastic cover.

Step 2: Disconnect the Battery

Locate the power connector cable and use the prying tool to disconnect it.

Step 3: Replace the Desired Part

Depending on the part you wish to replace, the procedure will vary. Generally, each component is held down by screws and connected to the motherboard via cables. Unfasten the screws, disconnect the cables, and carefully remove the part.

Step 4: Install the New Part

Position the new part in the same orientation as the old one was. Connect any necessary cables and fasten any screws.

Step 5: Reconnect the Battery and Back Cover

Reconnect the power connector and carefully snap the back cover back into place.

Note:Always ensure that the phone is turned off and disconnected from any power source before attempting any replacement. If the procedure seems too complex, don't hesitate to consult a professional.