Motorola Moto E6 repuestos

    There are 2 products.

    Motorola Moto E6 Specifications

    The Motorola Moto E6, known in some markets as the Motorola Moto E6 repuestos, is a budget smartphone with solid performance. Here are its technical characteristics:

    • Display: 5.5 Inch IPS LCD
    • Resolution: 720 x 1440 pixels
    • Processor: Qualcomm SDM435 Snapdragon 435 (28 nm)
    • RAM: 2GB
    • Storage: 16GB/32GB, expandable vi...

    Motorola Moto E6 Specifications

    The Motorola Moto E6, known in some markets as the Motorola Moto E6 repuestos, is a budget smartphone with solid performance. Here are its technical characteristics:

    • Display: 5.5 Inch IPS LCD
    • Resolution: 720 x 1440 pixels
    • Processor: Qualcomm SDM435 Snapdragon 435 (28 nm)
    • RAM: 2GB
    • Storage: 16GB/32GB, expandable via microSD card slot
    • Battery: 3000mAh, removable
    • Operating system: Android 9.0 (Pie)
    • Camera: 13 MP with LED flash, panorama, HDR

    Instructions for Replacing Motorola Moto E6 Parts

    Replacing parts on your Motorola Moto E6 requires some patience, the correct tools, and a steady hand. Here are the general steps:

    Tools Needed

    • Tweezers
    • Screwdriver set
    • Plastic opening tools

    Replacement Instructions

    Step 1: Turn off the device.

    It's crucial to ensure your device is turned off before starting any repairs to prevent any possible short circuits.

    Step 2: Remove the back cover.

    Use a plastic opening tool to gently pry the back cover off the phone.

    Step 3: Remove the battery.

    Once the back cover is removed, you will see the battery. Carefully lift it out of the phone.

    Step 4: Unscrew the frame covering.

    Use your screwdriver to remove the screws holding the plastic frame covering in place. Then, lift the frame from the device.

    Step 5: Remove the part to be replaced.

    Depending on the part that needs replacing (screen, camera, charging port, etc.), you may need to remove additional screws or disconnect ribbon cables. Always handle with care to avoid damaging the device's internals.

    Step 6: Install the new part.

    Place the new part into the phone, ensuring that it's securely attached and that all connections are made if necessary.

    Step 7: Reassemble the device.

    Once your new part is in place, simply follow these instructions in reverse order to reassemble your device.

    Please note that working on your device can void the warranty. If you are not confident in your abilities to perform these repairs, consider hiring a professional to do them on your behalf.

    Less
    More
    Showing 1 - 2 of 2 items