Motorola Moto Edge 20 Pro spare parts

Motorola Moto Edge 20 Pro Technical Specifications and Parts Replacement Guide

The Motorola Moto Edge 20 Pro is a powerful smartphone with an array of impressive features. This guide provides detailed specifications and equally meticulous replacement steps for the vital parts of the device.

Motorola Moto Edge 20 Pro Technical Specifications

• Display: 6.7-inch OLED with 1080 x 2400 pixels
• Processor: Qualcomm SM8350 Snapdragon 870 5G
• RAM: 8GB/12GB
• Storage: 128GB/256GB, non-expandable
• Camera: 108 MP, f/1.9, (wide), 1/1.52', 0.7µm, PDAF, 8 MP, f/3.4, 126mm (periscope telephoto), 1/4.4', PDAF, 5x optical zoom, OIS
• Battery: Li-Po 4500 mAh, non-removable
• Operating System: Android 11

Replacing Motorola Moto Edge 20 Pro Parts

Below is a detailed guide on how to replace the Motorola Moto Edge 20 Pro parts. Please note, attempting to repair your device can void your warranty and the process should be undertaken only by trained individuals or professionals.

Screen Replacement

Replacing the screen is a sensitive task. Ensure you have all the necessary repair tools and a new, compatible screen prepared.

• Power off your device to prevent any electrical damage.
• Using a heat gun, heat around the edges of the device to loosen the adhesive.
• Carefully remove the back cover using a suction cup and a plastic opening tool.
• Remove all screws securing the phone’s internals.
• Remove the battery connector from the motherboard.
• Disconnect and remove the broken screen.
• Attach the new screen to the phone and reconnect the cables.
• Reassemble the phone in reverse order of disassembly.

Always proceed with caution while carrying out these steps. If you're not confident with these instructions, seek help from a professional.

Battery Replacement

Here's how to replace the non-removable battery of your Motorola Moto Edge 20 Pro.

• Ensure the device is powered off.
• Follow the steps mentioned in the screen replacement guide to open the device and reach the battery.
• Once you've reached the battery, disconnect it from the motherboard.
• Carefully remove the adhesive holding the battery in place using a plastic opening tool, then remove the battery.
• Place the new battery in the slot and connect it to the motherboard.
• Reassemble the device in reverse order of disassembly.

Note: Please follow the manufacturer's instructions while charging the new battery for the first time.