Motorola Moto Edge 20 spare parts

Motorola Moto Edge 20 Repuestos Characteristics

The Motorola Moto Edge 20 offers a broad range of technical characteristics which makes it unique and sophisticated. These repuestos, or spare parts, are essential to maintaining the phone's optimal performance.

• Display: Super AMOLED, HDR10, 90Hz, 1080 x 2400 pixels, 6.7 inches
• Processor: Qualcomm Snapdragon 778G
• Storage and RAM: 128/256 GB, 6/8GB RAM
• Battery: Li-Po 4000 mAh, non-removable
• Camera: 108 MP, f/1.9 wide-angle camera, 8 MP f/2.2 119˚ ultrawide-angle camera, 2 MP f/2.4 depth sensor

Instructions for Replacing Motorola Moto Edge 20 Repuestos

Follow the next steps to replace certain parts of your Motorola Moto Edge 20. Always remember to work in a clean environment and have the required tools ready, such as a screwdriver, tweezers, and pry tools.

1. Removing the Back Cover

• Switch off your phone to avoid any electrical injury.
• Use the heated iOpener to loosen the back cover adhesive.
• Insert the opening tool between the frame and the back cover gently.
• Slide across the edge to sever the adhesive.

2. Replacing the Battery

• Unscrew and remove the plastic cover that protects the battery connector.
• Use the nylon spudger to disconnect the battery connector from the main board.
• Insert the spudger below the battery and gently lift to remove it.
• Install the new battery and reconnect it to the main board.

3. Replacing the Screen

• Remove all screws securing the front screen to the chassis.
• Use the opening tool to lift the screen off the chassis gently.
• Unclip the connector that attaches the screen to the main board.
• Attach the new front screen to the connector and secure it back to the chassis with screws.

Once you complete these steps, rebuild your phone by reattaching the back cover. Please note that some internal components may require special knowledge to replace. If you are unsure, please consult with a professional technician.