Motorola Moto Edge 30 Fusion spare parts

Motorola Moto Edge 30 Fusion Technical Specifications

The Motorola Moto Edge 30 Fusion boasts impressive specifications. It is important to know these specifications before attempting any repair or replacement procedures.

Display

• Type: OLED, 1B colors, 90Hz
• Size: 6.7 inches
• Resolution: 1080 x 2400 pixels

Hardware

• Chipset: MediaTek MT6877 Dimensity 800U 5G (7 nm)
• CPU: Octa-core (2x2.4 GHz Cortex-A76 & 6x2.0 GHz Cortex-A55)
• GPU: Mali-G57 MC3

Camera

• Main Camera: 108 MP, f/1.9, (wide)
• Selfie Camera: 32 MP, f/2.2, (wide)

Memory

• RAM: 6GB
• Storage: 128GB

Instructions for Replacing Motorola Moto Edge 30 Fusion Repuestos

Ensure you have the right tools before you begin. A screwdriver, a pry tool, and a suction cup would be necessary.

Step 1: Power off the device

Always start by switching off the device to avoid any short-circuits. Hold down the power button and confirm the shutdown.

Step 2: Remove the SIM Tray

Use the SIM Tray ejection tool to remove the SIM card holder.

Step 3: Open the back cover

Place the suction cup on the back cover. Be careful not to place it on top of the lens. Apply gentle pressure on the handle of the suction cup and lift the edge of the back cover.

Step 4: Detach the battery

Remove the screws and carefully use the pry tool to disconnect the battery connector.

Step 5: Replace the part

Identify the faulty part that needs replacing, remove it carefully, and install the new component.

Step 6: Reassemble the device

Make sure every part is in its right place, reconnect the battery and close the back cover.

Note: If you’re uncomfortable with any of these steps, it’s highly recommended to take the device to a professional for the replacement.