Motorola Moto Edge 30 Ultra spare parts

Motorola Moto Edge 30 Ultra Repuestos Technical Characteristics

The Motorola Moto Edge 30 Ultra is designed with several high-quality components that enhance the overall performance and user experience. Here are the technical characteristics for several of its core components:

• Screen: OLED, 1B colors, 144Hz, HDR10+, 6.7 inches, 108.4 cm2 (~99.5% screen-to-body ratio), 1080 x 2400 pixels (~393 ppi density), Gorilla Glass 5.
• Processor: Qualcomm SM8350 Snapdragon 898 5G (4 nm), Octa-core (1x2.84 GHz Kryo 680 & 3x2.42 GHz Kryo 680 & 4x1.8 GHz Kryo 680), Adreno 660.
• Battery: Li-Ion 5000 mAh, non-removable. Supports Fast charging 68W, 50% in 15 min, 100% in 38 min (advertised).
• Memory: RAM - 12/16 GB, Internal Memory - 128/256 GB, UFS 3.1.

Instructions to replace Motorola Moto Edge 30 Ultra Repuestos

To replace specific components of Motorola Moto Edge 30 Ultra, you need specialized tools and a careful process. Here are the general steps to help you replace them:

Screen Replacement

• Make sure the device is turned off before beginning the repair process.
• Use a hairdryer or heat gun to soften the adhesive around the edges of the display.
• Use a plastic opening tool to gently pry the screen from the frame.
• Be cautious not to tear the fragile ribbon cables connecting the display to the motherboard.
• Once the screen is removed, you can replace it with a new one, ensuring the connection cables are securely connected.

Battery Replacement

• After removing the screen, you will see the battery.
• Disconnect the battery cable from the motherboard.
• If adhesive is holding the battery in place, apply some heat to weaken it, then carefully pry the battery free.
• Once removed, you can replace it with the new battery, connect the cables, and reassemble the device.

Please be aware, the process might vary slightly depending on the specific component that is being replaced. Always use recommended tools and take necessary precautions to prevent any potential damage.